欢迎光临
手机网站 | 联系我们:027-59325428 18672922738 | 加入收藏
  • 当前位置:武汉辰龙天和科技有限公司 > 产品中心 > 进口激光测距传感器 > FAE意大利LS113PS激光传感器 带网络DP通讯

    FAE意大利LS113PS激光传感器 带网络DP通讯

    产品型号: LS113PS
    品  牌: FAE
    • ≧1 台
      ¥1.00
    所 在 地: 湖北武汉
    更新日期: 2020-09-24
    详细信息
    FAE意大利LS113PS激光传感器 带网络DP通讯
     

    General Product Description

    The LS113PS is a laser distance measuring module to determine distances from 0.1 m to 30 m, using natural surfaces,

    or to measure distances up to 150 m with a target reflector. Providing a red laser sighting point, the LS113PS allows you to

    unequivocally mark a particular target. Its effective operating range depends on the reflectance and surface qualities

    of the targets being sighted.

    The module works based on comparative phase measurement. It emits modulated high-frequency light which is diffusely

    reflected back from the target with a certain shift in phase to be compared with a reference signal.

    From the amount of phase shift, a required distance can then be determined with millimeter accuracy.

    A distance measurement cycle can be triggered:

    • via the Profibus

    • from an external trigger source (external trigger mode)

    • via the SSI.

    Special performance features are:

    • Profibus interface

    • Broad range of parameter setting options via Profibus

    • SSI interface

    • Two switching outputs, each with selectable parameter settings

    • External trigger input, with selectable parameter settings

    • Capable of operating at outdoor temperatures from +15°C to +30°C with ±2 mm accuracy

    • Up to 30 m reach for distance measurement, with potential for 150 m reach if additional reflectors are mounted onto the target.

    • Visible laser beam for easier sightingl.

    The LS113PS measuring module is shipped in a rugged cardboard box with adequate padding for safe transportation.

    Conforming Use

    • Measurement of distances and output of measured data to the Profibus.

    • Special measuring functions.

    • Compliance with prescribed temperatures for operation and storage.

    • Operation at correct voltage level.

    • Application of specified signal levels to the appropriate data lines.

    Nonconforming Use

    • Do not operate the LS113PS in any other way than described under “Intended & Conforming Use“ above and only in a proper

    working condition.

    • Safety devices must not be defeated or otherwise rendered ineffective.

    • Information and warning signs must not be removed.

    • Repair work on the LS113PS must not be carried out by anyone other than FAE S.r.l. personnel.

    • Refrain from using the LS113PS in an explosive environment.

    • Measurement with the LS113PS pointed at the sun or other strong lightsources may produce faulty results.

    • Measurement of targets with poor surface reflectance in a strongly reflecting environment may also result in faulty

    measurement values.

    • Measurement of strongly reflecting surfaces may deliver faulty results.

    • Measurement performed through transparent optical media, for example, glass, optical filters, plexiglass, etc. may equally

    produce incorrect results.

    • Rapidly changing measuring conditions are likely to falsify the result of measurement.

    LS113PS意大利激光传感器 带网络DP通讯 激光测距仪

    LS113PS意大利激光传感器 带网络DP通讯 激光测距仪

  • 留言
    标  题: *(必填)
    内  容: *(必填)
    联系人:
    邮  箱:
    手  机:
    固  话:
    *(必填)
    公  司: *(必填)
    地  址: *(必填)
版权所有 © 武汉辰龙天和科技有限公司
主营产品:激光测距传感器,光电传感器,激光位移传感器,国产激光测距传感器,进口激光测距传感器,迪马斯(DIMETIX)激
联系人:廖猛  联系电话:027-59325428  传真:027-84881397
联系地址:湖北省武汉市汉阳区汉阳大道654号阳城景园1栋1单元301室

技术支持:谷瀑环保     免责申明     鄂ICP备12004745号